Video - How to replace sensor in 3D TERMINAL
The following video explains step by step how to replace the sensor in TBS 3D TERMINAL. Please follow the steps carefully:
Related Articles
Video - How to replace mainboard in 3D TERMINAL
The following video explains step by step how to replace the mainboard in TBS 3D TERMINAL. Please follow the steps carefully:
Video - How to replace mainboard in 2D TERMINAL
The following video explains step by step how to replace the mainboard in TBS 2D TERMINAL. Please follow the steps carefully:
Video - How to replace C13 capacitor in 3D Terminal
The following video explains the procedure to replace C13 capacitor. There is also a Technote available explaining the same.
HowTo - Resolve 3D sensor errors
The sensor in 3D AIR (Model 2012, former 3D TERMINAL) is not working stably and sensor runtime issues are reported regularly Solution If firmware is not able to load sensor at startup or report sensor run-time issues (error codes 42/412/414), it may ...
HowTo - 3D Sensor-Probleme beheben
Der Sensor im 3D AIR (Modell 2012, ehemals 3D TERMINAL) arbeitet nicht stabil und es werden regelmässig 'sensor runtime' Fehlermeldungen angezeigt. Lösung Falls die Firmware den Sensor beim Start nicht korrekt laden kann oder einen Sensor runtime ...