To install an RFID module in 2D IRON, please follow the procedure in this video: The installation of an RFID module in 3D AIR (22) is shown in these pictures:
The following video explains how to replace the TCOM board in TBS 2D SENSE equipped with a TCOM30x board. Please follow these steps carefully: 1. lift up the black connector fixation by 1 mm (it slides out) 2. remove the cable carefully 3. remove 2 ...
Question What RFID card technologies are supported in different TBS device types? Answer The following table lists the RFID technologies supported in different TBS device types: Beginning with 2.06.x FW, the 3D LIGHT supports RFID only in 'EF-45N' ...
The following video briefly shows how to install the thermal sensor module in a 3D LIGHT (former name: 2D EYE). Thus, the device is updgraded to the TBS 3D LIGHT THERMAL.